混凝土会在短时间内凝结成块，并且会对自动上料搅拌机的钢材部分跟油漆造成一定的腐蚀，所以每次使用搅拌机后要及时清洗，洗净粘附在混凝土储存罐和进出料口的混凝土是每日维护必须认真进行的工作。

　　The concrete will condense into blocks in a short time, and will cause certain corrosion to the steel parts and paint of the automatic feeding mixer. Therefore, it is necessary to clean the concrete adhered to the concrete storage tank and the inlet and outlet of the concrete after each use of the mixer.

　　其中包括：

　　These include:

　　1、每次搅拌机装料前用水冲洗进料口，使进料口在装料时保持湿润；

　　1. Wash the feed inlet with water before each mixer loading to keep the inlet wet during loading;

　　2、在装料的同时向随车自带的清洗用水水箱中注满水；

　　2. At the same time of loading, fill the water tank with water;

　　3、装料后冲洗进料口，洗净进料口附近残留的混凝土；

　　3. After loading, wash the inlet to clean the residual concrete near the inlet;

　　4、搅拌机在下次装料前切记放掉混凝土贮罐内的污水；

　　4. Remember to discharge the sewage in the concrete tank before the next loading of mixer truck;

　　5、到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30—40 L；在车辆回程时保持混凝土贮罐正向慢速转动；

　　5. After unloading at the construction site, wash the discharge tank, and then add 30-40 l of cleaning water into the concrete storage tank; keep the concrete storage tank in forward and slow rotation when the vehicle returns;
             

　　6、每天收工时彻底清洗搅拌机混凝土贮罐及进出料口周围，保证不粘有水泥及混凝土结块。

　　6. At the end of each day, thoroughly clean the concrete storage tank of the mixer truck and the surrounding of the inlet and outlet to ensure that there is no cement and concrete caking.

　　以上这些工作只要一次不认真进行，就会给以后的工作带来很大的麻烦。

　　As long as the above work is not carried out seriously, it will bring great trouble to the future work.

　　长时间使用搅拌机，不仅需要保养汽车零件配件等，对于搅拌机外表漆面的保养也是比较重要的。

　　Long time use of mixer, not only need to maintain auto parts and accessories, but also the maintenance of exterior paint surface of mixer is more important.

　　1、搅拌机在太阳紫外线的照射下，漆膜会不断向空气中蒸发油份来达到保护自身的作用，时间长了就会造成漆面油分的过分散失。漆面的亮度、深度都大打折扣，漆面会慢慢发白，形成氧化层，缩短了车漆的寿命。搅拌机漆面氧化严重的话可以通过研磨和抛光来处理。

　　1. Under the ultraviolet radiation of the sun, the paint film will continuously evaporate oil to the air to protect itself, which will cause excessive loss of the paint oil over time. The brightness and depth of the paint are greatly reduced, and the paint surface will slowly turn white and form an oxide layer, which shortens the service life of the car paint. If the paint surface of mixer is seriously oxidized, it can be treated by grinding and polishing.

　　2、如果平时不对搅拌机漆面作护理，金属漆可能产生一种非常细微的裂痕，会不断地渗透车漆，直到穿透整个色漆层，这种现象就叫“龟裂”。如果裂纹中有车蜡，会发现车身有条纹状的龟裂现象。经常打蜡可以让龟裂情况逐渐减少。

　　2. If you don't take care of the paint surface of the mixer truck at ordinary times, the metallic paint may produce a very subtle crack, which will continuously penetrate the paint until it penetrates the whole paint layer. This phenomenon is called "cracking". If there is car wax in the crack, the car body will be found to have striated cracking phenomenon. Regular waxing can reduce cracking.

　　3、搅拌机上出现面状磨蚀。很可能是因为昆虫、鸟粪、树汁、焦油、沥青引起的。一些轻微的蚀痕可以用研磨抛光来。

　　3. Surface abrasion occurred on the mixer. It is probably caused by insects, bird droppings, tree sap, tar and asphalt. Some minor etchings can be resolved by grinding and polishing.

　　以上就是对于搅拌机漆面保养方法，希望对你有所帮助！如您有其他业务疑问，欢迎咨询我们的网站！

　　The above is for the mixer paint maintenance methods, hope to help you! If you have other business questions, welcome to consult our website!