The automatic feeding mixer is a kind of mechanical vehicle equipment that is common in some construction processes. There are some matters needing attention in the process of operating the equipment. Today, let's take a look at the precautions of the automatic feeding mixer in the unloading process.
1. Before unloading, let the mixing tank run at full speed for a minute or two to fully mix the concrete. If necessary, add some water to make the concrete mix more evenly and facilitate unloading.
2. When discharging, park the truck on the flat ground as much as possible and wet the chute of the discharge hopper before discharging to facilitate cleaning.
3. Keep an eye on yourself when discharging, so as to prevent the discharging operator from operating the discharging lever at random. Stop every time when the tank is in the middle of the forward and reverse direction, and protect the reducer, supporting wheel, etc.
4. When washing the tank, be sure to wash it carefully, and repeat the positive and negative rotation of the water twice, and then release it. In the next trip, put all the water in the tank into the tank, and then return to the station to add water to clean the tank.
In the process of using the automatic feeding mixer, in order to ensure the good operation performance of the equipment, we hope that you must understand these precautions, so as to avoid operating errors due to ignorance of the equipment during the operation, which will affect the normal construction process. Follow us http://www.zkhntjbj.com , learn more about it!