欢迎您访问莱州聚峰机械有限公司网站!
点击拨打服务热线:150-5352-4111
大家都在搜: 6.5方自动上料搅拌机 6.5方自动上料混凝土搅拌机 6.5方自动上料搅拌机多少钱

自动上料搅拌机承载力怎么选择?

来源:http://www.zkhntjbj.com/日期:2021-08-13 浏览量: TAG:混凝土搅拌机、自动上料搅拌机、搅拌一体机

概述:底盘选择Chassis selection搅拌车底盘能够应对各种路况,不轻易出问题,日常行驶无压力,发动机要稳定、动力强,整车综合性能要保证良好,
底盘选择
Chassis selection
搅拌车底盘能够应对各种路况,不轻易出问题,日常行驶无压力,发动机要稳定、动力强,整车综合性能要保证良好,能省油……多数朋友们在选底盘的时候会问到这些问题。如何选择,小瑞还是建议以品牌为导向。保障搅拌车底盘能够给上装的液压系统提供充足的动力源。
The chassis of the mixer truck can cope with various road conditions and is not easy to cause problems. There is no pressure in daily driving. The engine should be stable and powerful. The comprehensive performance of the whole vehicle should be good and can save fuel... Most friends will ask these questions when choosing the chassis. How to choose, Xiao Rui still suggests brand orientation. Ensure that the mixer chassis can provide sufficient power source for the installed hydraulic system.
说到底盘,就不得不提到底盘的三大件:发动机、变速器、车桥。发动机动力是否强劲,排放标准几何,油耗多少?变速器几个档位,节油性能怎么样?车桥里前桥多重,后桥多重,承载力如何?都需要朋友们仔细询问。
When it comes to the chassis, we have to mention the three major parts of the chassis: engine, transmission and axle. Is the engine powerful, the emission standard geometric, and the fuel consumption? How about the fuel saving performance of the transmission in several gears? How heavy is the front axle and the rear axle in the axle? What is the bearing capacity? All need friends to ask carefully.
关于底盘到底是选进口还是买国产,也是需要各位朋友权衡利弊。总的来说:进口底盘确实好,主流五十铃日产柴,日野三菱能见到,优势就是维修少,操作方便油耗小,但是价格很困扰,方量普遍也很小,九方以上找不到。国产品牌两大宝,维修方
As for whether the chassis is imported or domestic, you also need to weigh the pros and cons. Generally speaking, the imported chassis is really good. The mainstream Isuzu Nissan Diesel and Hino Mitsubishi can see it. The advantage is less maintenance, convenient operation and low fuel consumption. However, the price is very troublesome, and the square volume is generally very small. It can't be found above Jiufang. Domestic brands, two treasures, maintenance party
便价格好,品质逐渐在反超,方量也能任你挑,经济实惠性价比高。
The price is good, the quality is gradually surpassing, and the square quantity can be chosen by you. It is economical and cost-effective.
自动上料搅拌机
液压系统
Hydraulic system
在液压系统中,重要的是油泵和马达。搅拌车会经常处于高负荷状态,所以对于它整个液压系统的稳定性要求很高,搅拌罐一停,可能导致罐内的混凝土凝固。所以,液压系统马虎不得。
In the hydraulic system, the oil pump and motor are important. The mixer truck is often in a high load state, so it has high requirements for the stability of the whole hydraulic system. Once the mixing tank stops, the concrete in the tank may solidify. Therefore, the hydraulic system should not be sloppy.
常用进口及国产液压系统:
Common imported and domestic hydraulic systems:
各位朋友们在购买搅拌车的时候一定要询问清楚,液压油泵、马达和减速机用的是什么品牌,这些品牌在行业内的地位如何。
When you buy a mixer truck, you must ask clearly what brands are used for hydraulic oil pump, motor and reducer, and what is the status of these brands in the industry.
搅拌罐
Mixing tank
对于搅拌罐来说,耐磨性是要义。罐体采用什么样的材质和生产工艺,直接影响到质量大关是否有保障。搅拌罐一般是采用高强度耐磨钢制作而成。一定要注意的是,有些品牌会在钢板的厚度上做文章,同时,要注意搅拌罐内的叶片是否也是高强度的耐磨合金材质。
For the mixing tank, wear resistance is the essence. What kind of material and production process are adopted for the tank body directly affects whether the quality level is guaranteed. The mixing tank is generally made of high-strength wear-resistant steel. It must be noted that some brands will make an issue on the thickness of the steel plate. At the same time, pay attention to whether the blades in the mixing tank are also made of high-strength wear-resistant alloy.
其次,设计和配置是否合理也至关重要。搅拌车是否符合国内的运输和路况,配置是否能够有效提升车辆使用的便捷性和安全性都要综合考虑在内.再次,轻量化已成行业趋势。轻量化的设计能大大增加装载量,为用户带来更高的运
Secondly, whether the design and configuration are reasonable is also very important. Whether the mixer meets the domestic transportation and road conditions and whether the configuration can effectively improve the convenience and safety of vehicle use should be taken into account. Thirdly, lightweight has become an industry trend. The lightweight design can greatly increase the loading capacity and bring higher transportation for users
营价值啊。
Business value.
罐车制造工艺水平的高低影响搅拌罐的使用寿命,包括焊缝强度、制件及涂装质量在内等等工艺都是评价搅拌罐的重要标准。而如何保证制造的精度和产品的一致性,则需要落脚到是否拥有规模化的数字化、智能化生产线。
The level of tank car manufacturing process affects the service life of the mixing tank. The process, including weld strength, parts and coating quality, is an important standard for evaluating the mixing tank. How to ensure the manufacturing accuracy and product consistency, we need to focus on whether we have a large-scale digital and intelligent production line.
买车的时候不要贪图小便宜,对搅拌车品牌有足够的了解,不单单是价格的对比,若有必要,去工厂实际考察一番或许会让你收获更多。
When buying a car, don't be greedy for small and cheap. You have enough knowledge of the mixer brand, not just the price comparison. If necessary, you may gain more by going to the factory for an actual investigation.

截屏,微信识别二维码

微信号:

点击微信号复制,添加好友

 打开微信