自动上料搅拌机

24小时服务热线

15098551508

点击拨打服务热线:150-9855-1508
大家都在搜: 4.0方自上料搅拌机 0.5方自上料搅拌机 0.5方自上料搅拌机

混凝土搅拌机耐磨配件为什么会损坏?

来源:http://www.zkhntjbj.com/日期:2021-03-15 浏览量: TAG:混凝土搅拌机、小型混凝土搅拌机、搅拌一体机

概述:搅拌机耐磨配件在搅拌混凝土材料的过程中作用是不可忽视的,因为它长期处于运转过程中,长期的负荷会加剧搅拌机耐磨配件的损坏或使用不佳。
搅拌机耐磨配件在搅拌混凝土材料的过程中作用是不可忽视的,因为它长期处于运转过程中,长期的负荷会加剧搅拌机耐磨配件的损坏或使用不佳。然后会对搅拌均匀彻 底有很大影响。我们需要了解到搅拌机耐磨配件损坏的主要原因,并在日常的使用时留心避免这些情况的出现。
The function of the mixer wear-resistant parts in the process of mixing concrete materials can not be ignored, because it is in the process of long-term operation, and the long-term load will aggravate the damage or poor use of the mixer wear-resistant parts. Then it will have a great influence on the uniformity and thoroughness of mixing. We need to understand the main reasons for the damage of mixer wear-resistant parts, and pay attention to avoid these situations in daily use.
             混凝土搅拌机厂家
在搅拌开始之后,搅拌机的高速运转也会带动搅拌机耐磨配件的不断搅拌混凝土,由于混凝土的组成比较复杂,长期吸附在搅拌机耐磨配件上也会让磨损加快。同时搅拌机使用一段时间后,紧固搅拌衬板的螺栓就会逐渐松开,从而使其出现扭转,角度远离了标准自然就会让磨损情况更加严重。
After the beginning of mixing, the high-speed operation of the mixer will also drive the continuous mixing of concrete with wear-resistant parts of the mixer. Due to the complex composition of concrete, long-term adsorption on the wear-resistant parts of the mixer will also accelerate the wear. At the same time, after the mixer has been used for a period of time, the bolts that fasten the mixing lining plate will gradually loosen, so that it will twist, and the angle away from the standard will naturally make the wear situation more serious.
其实混凝土搅拌机耐磨配件的磨损几乎是无法避免的,我们可以做的就是购买质量相对比较好的搅拌机耐磨配件,同时在磨损时可以及时修复,维持比较长的使用寿命。
In fact, the wear of concrete mixer wear-resistant parts is almost inevitable, what we can do is to buy relatively good quality mixer wear-resistant parts, and at the same time, it can be repaired in time to maintain a relatively long service life.

截屏,微信识别二维码

微信号:

点击微信号复制,添加好友

 打开微信