搅拌一体机使用不当对身体及设备造成的伤害
来源：http://www.zkhntjbj.com/日期：2022-10-07
在使用
搅拌一体机的过程中，如果使用不当，很容易给自己或者设备本身造成伤害，那么在日常施工中，搅拌一体机有哪些施工注意事项呢？从两大类讲解：
In the process of using the all-in-one mixer, if it is not used properly, it is easy to cause injury to yourself or the equipment itself. What are the safety construction precautions for the all-in-one mixer in daily construction? Explain from two categories:
其中一大类是搅拌一体机使用不当对身体造成的伤害：
One of the major categories is the damage to the body caused by improper use of the mixer:
1、泵机工作时身体部分进入料斗或运动机构内所引起的伤害；
1. Injuries caused by body parts entering the hopper or moving mechanism when the pump is working;
2、混凝土、液压油飞溅，水泥或其它化学物质引起的眼伤；
2. Eye injuries caused by concrete, hydraulic oil splash, cement or other chemical substances;
3、在活塞运动时，手伸入洗涤室内而造成的伤害；
3. Injuries caused by hands reaching into the washing room when the piston is moving;
4、电缆线的内外保护破损，电气元件失效和损坏导致的泵机带电，而引起的触电伤害；
4. Electric shock injury caused by damage of internal and external protection of cables, failure and damage of electrical components, resulting in electrification of the pump;
二大类是搅拌一体机使用不当对设备本身造成的伤害：
The second category is the damage to the equipment caused by improper use of the mixer:
1、由于液压系统没有卸压就检修液压管路引起的伤害；
1. Injuries caused by maintenance of hydraulic pipeline without pressure relief of hydraulic system;
2、由于吊运或支撑方式不当造成泵机倾覆而引起的伤害；
2. Injury caused by pump overturning due to improper lifting or support;
3、混凝土输送管内有压力时拆开管路所造成的伤害；
3. Damage caused by disassembling the pipeline when there is pressure in the concrete delivery pipe;
4、输送管路未固定使管路滑动或脱落而造成的伤害或管接头、管路爆裂等造成的伤害；
4. Injuries caused by sliding or falling off of pipelines due to unfixed transmission pipelines or injuries caused by bursting of pipe joints and pipelines;
5、在滑阀油缸工作时，对润滑脂系统进行检修造成的伤害；
5. Damage caused by maintenance of the lubricating grease system when the slide valve oil cylinder is working;
6、车载强制式搅拌泵高压软管爆裂造成的伤害；
6. Injuries caused by bursting of high-pressure hose of vehicle mounted forced mixing pump;
7、阻止搅拌器或其它旋转部件运动而造成的伤害；
7. Prevent injuries caused by the movement of agitator or other rotating parts;
8、搅拌泵产生溢流噪声并且系统压力下降，阀体表面用手触摸时感觉温度异常时。主要是由于搅拌泵系统内阀、顺序阀的先导阀芯严重磨损，引起泄漏，造成发热，致使油温过高造成的伤害。
8. The mixing pump produces overflow noise, the system pressure drops, and the valve body surface feels abnormal temperature when touched by hand. It is mainly because the pilot valve cores of the safety valve and sequence valve in the mixing pump system are seriously worn, causing leakage, heating and damage caused by high oil temperature.
The damage to the body and equipment caused by improper use of the mixing machine will be explained here. If you don't know anything about it, please come to our website http://www.zkhntjbj.com consulting service
全国服务热线
点击拨打服务热线：400-879-1999
