欢迎您访问莱州聚峰机械有限公司网站!
点击拨打服务热线:400-879-1999
大家都在搜: 4.0方搅拌机 4.0方搅拌机 4.0方搅拌机

混凝土搅拌机的罐体油漆保养的细节

来源:http://www.zkhntjbj.com/日期:2022-09-30

概述:混凝土搅拌机在运输时,混凝土会在短时间内凝固成硬块,而且对钢材和油漆都有一定的腐蚀性,所以每次使用混凝土贮罐后,洗净粘附在混凝土贮
混凝土搅拌机在运输时,混凝土会在短时间内凝固成硬块,而且对钢材和油漆都有一定的腐蚀性,所以每次使用混凝土贮罐后,洗净粘附在混凝土贮罐及进出料口上的混凝土是每日须行认真维护的工作。下面我们来讲讲混凝土搅拌机的罐体油漆五点保养事项吧。
During the transportation of the concrete mixer, the concrete will solidify into hard blocks in a short time, and it will be corrosive to steel and paint to a certain extent. Therefore, after each use of the concrete storage tank, it is necessary to carefully maintain the concrete adhered to the concrete storage tank and the inlet and outlet every day. Now let's talk about the five points maintenance of the tank paint of the concrete mixer.
1、防龟裂保养:搅拌车行驶后如表面出现裂痕,那么平时不对漆面作护理,金属漆可能产生一种非常细微的裂痕,它会不断地渗透车漆,直至穿透整个色漆层,这种现象就叫“龟裂”。有时因为重喷漆质量的问题,也会产生龟裂。如果裂纹中有车蜡,会发现车身有条纹状的龟裂现象。经常打蜡可逐渐减少龟裂的产生。
1. Anti cracking maintenance: If cracks appear on the surface of the mixer after driving, the paint surface is not normally treated. The metal paint may produce a very fine crack, which will continuously penetrate the car paint until it penetrates the entire paint layer. This phenomenon is called "cracking". Sometimes cracks may occur due to the quality problem of re painting. If there is car wax in the crack, it will be found that the body has striped cracks. Frequent waxing can gradually reduce cracking.
2、防褪色保养:小型混凝土搅拌机褪色,大气中的油烟和污染物是造成车漆变色、褪色的主要原因。褪色与氧化不同,发生褪色时,车漆会出现不均匀的色差。中、轻度的褪色可用研磨、抛光治理,严重时须重新喷漆。
2. Anti fading maintenance: the fading of small concrete mixer and the oil smoke and pollutants in the atmosphere are the main reasons for the discoloration and fading of car paint. Fading is different from oxidation. When fading occurs, the car paint will have uneven color difference. Moderate and mild discoloration can be treated by grinding and polishing, and re painting is required in case of severe discoloration.
混凝土搅拌机
3、防蚀痕:小型搅拌车蚀痕,蚀痕是面状磨蚀。昆虫、鸟粪、树汁、焦油、沥青都有可能引起的蚀痕。轻微的蚀痕可用研磨抛光解决。
3. Anti corrosion mark: the corrosion mark of small mixer truck is surface abrasion. Insects, bird droppings, tree sap, tar and asphalt may cause erosion marks. Minor corrosion marks can be solved by grinding and polishing.
4、水痕纹:搅拌车水痕纹,水痕纹是水滴蒸发后留下的痕迹,呈环状。氧化、常用洗涤灵清洗的车容易染上水痕。轻微水痕纹的通过打蜡抛光可治愈,严重时需研磨或喷漆。
4. Water mark: the water mark of the mixer truck. The water mark is the mark left by the evaporation of water droplets, which is circular. Vehicles that are oxidized and washed with detergent are easy to get water marks. Slight water marks can be cured by waxing and polishing, and serious water marks need to be grinded or painted.
混凝土搅拌机的罐体油漆保养的细节讲解完毕,从四个方面来分析了问题,您对此有什么问题想了解,就来我们网站http://www.zkhntjbj.com咨询吧!
After explaining the details of the tank paint maintenance of the concrete mixer, we analyzed the problems from four aspects. If you have any questions, please come to our website http://www.zkhntjbj.com Consult!

截屏,微信识别二维码