欢迎您访问莱州聚峰机械有限公司网站!
点击拨打服务热线:400-879-1999
大家都在搜: 铲斗外翻 3.5吨A后侧 3.5吨A后尾

混凝土搅拌机需要及时调整活塞杆

来源:http://www.zkhntjbj.com/日期:2022-01-11

概述:当使用混凝土搅拌机时,我们要注意压力问题。 如果混凝土搅拌机的压力太大,就要注意这一点。 停止使用它。 这样可以避免一些事故,并找
当使用混凝土搅拌机时,我们要注意压力问题。 如果混凝土搅拌机的压力太大,就要注意这一点。 停止使用它。 这样可以避免一些事故,并找到一种方法将混凝土搅拌机的压力恢复到正常水平。 这是编辑器针对此问题提出的一些方案。
When using concrete mixer, we should pay attention to pressure. If the pressure of the concrete mixer is too high, pay attention to this. Stop using it. This can avoid some accidents and find a way to restore the pressure of the concrete mixer to the normal level. These are some solutions proposed by the editor for this problem.
混凝土搅拌机是这样一种机器,其中带有叶片的轴在圆筒中旋转,或者可以将各种材料混合并混合以形成混合物或合适的稠度。 混合机类型很多,包括强制混合机,单轴混合机和双轴混合机。
A concrete mixer is a machine in which a shaft with blades rotates in a cylinder or various materials can be mixed and mixed to form a mixture or a suitable consistency. There are many types of mixers, including forced mixer, single shaft mixer and double shaft mixer.
如果混凝土搅拌机在运行过程中承受过大的压力,则过滤器很容易堵塞并且损坏了搅拌机。 因此,使用混合器时要注意压力范围,以免因混合器过压而引起故障。
自动上料搅拌机
If the concrete mixer is under excessive pressure during operation, the filter is easy to block and damage the mixer. Therefore, pay attention to the pressure range when using the mixer to avoid failure due to overpressure of the mixer.
由于混凝土搅拌机的压力缓慢升高,因此过滤器通常会堵塞,应定期清洁。 二是气缸问题,因为气缸外部有泄漏。 通常是由于活塞杆组件中的疼痛,缺乏润滑供应,密封件和密封件的磨损或损坏,气缸中的杂质以及活塞杆上的划痕引起的。
Since the pressure of the concrete mixer rises slowly, the filter is usually blocked and should be cleaned regularly. The second is the cylinder problem, because there is leakage outside the cylinder. It is usually caused by pain in the piston rod assembly, lack of lubrication supply, wear or damage of seals and seals, impurities in the cylinder and scratches on the piston rod.
我们需要及时调整活塞杆的中间位置,定期检查油雾装置的可靠性,并及时清理。 由于导电电磁阀的发展,阀门出现故障,排气模式被简单地阻塞,形成了密封,并且主动阀卡在了电路故障中。 使用调音台时,我们可以使用整个工作站的封闭式设计。 搅拌机的压力是将间隔件和隔离室添加到混凝土搅拌机中。
We need to timely adjust the middle position of the piston rod, regularly check the reliability of the oil mist device and clean it in time. Due to the development of conductive solenoid valve, the valve fails, the exhaust mode is simply blocked, forming a seal, and the active valve is stuck in the circuit failure. When using the mixer, we can use the closed design of the whole workstation. The pressure of the mixer is to add spacers and isolation chambers to the concrete mixer.
另外,混凝土搅拌机的噪声源主要是混合宿主。 对于机械设备,主要的噪音问题是机器本身的问题,从而提高了自身的生产水平和技术水平。 研究了该位置的制造精度,并制定了可行且完善的处理方案,以较大程度地减少设备零件之间的间隙,尤其是叶片与主搅拌机垫片之间的距离尽可能小以防止结石。 声音变得清晰。
In addition, the noise source of concrete mixer is mainly the mixing host. For mechanical equipment, the main noise problem is the problem of the machine itself, which improves its own production level and technical level. The manufacturing accuracy of this position is studied, and a feasible and perfect treatment scheme is formulated to greatly reduce the gap between equipment parts, especially the distance between blade and main mixer gasket is as small as possible to prevent stones. The sound becomes clear.
感谢您的阅读,此文的文章来源: 自动上料搅拌机更多的内容和问题请点击:http://www.zkhntjbj.com我们会继续努力的为您提供服务,感谢您的支持!
Thank you for reading. The source of this article is: automatic feeding mixer. For more contents and questions, please click: http://www.zkhntjbj.com We will continue to work hard to provide you with services. Thank you for your support!

截屏,微信识别二维码