欢迎您访问莱州聚峰机械有限公司网站!
点击拨打服务热线:400-879-1999
大家都在搜: 铲斗外翻 3.5吨A后侧 3.5吨A后尾

全自动搅拌车的机器保护?

来源:http://www.zkhntjbj.com/日期:2021-07-05

概述:1 底片机将轴承完全加载,因此良好的光滑度是轴承寿命的主要因素。它直接影响机器的使用寿命和正常运行时间。因此,有必要清洗注入的滑油,
1.底片机将轴承完全加载,因此良好的光滑度是轴承寿命的主要因素。它直接影响机器的使用寿命和正常运行时间。因此,有必要清洗注入的滑油,本机的一次注油点(1)滚动轴承(2)滚动轴承(3)所有齿轮(4)可动轴承,滑动面密封应良好。
1. The negative machine completely loads the bearing, so good smoothness is the main factor of bearing life. It directly affects the service life and normal operation time of the machine. Therefore, it is necessary to clean the injected oil. The primary oil injection point (1) rolling bearing (2) rolling bearing (3) movable bearing of all gears (4) of this machine should be well sealed.
2.新设备的车轮容易松动,应经常检查。
2. The wheels of new equipment are easy to loosen, so they should be checked frequently.
3.注意机器的各个部分是否正常工作。
3. Pay attention to whether all parts of the machine work normally.
4.注意磨损零件的磨损程度,并随时更换磨损零件。
4. Pay attention to the wear degree of worn parts and replace worn parts at any time.
                      混凝土搅拌机厂家直销
5.放置移动设备的机架平面上的灰尘和其他灰尘,以防止当机器遇到坚不可摧的材料而造成严重事故时,可移动轴承在机架上移动。您需要确保没有对象。
5. Dust and other dust on the plane of the rack of the mobile equipment, so as to prevent the movable bearing from moving on the rack when the machine encounters indestructible materials and causes serious accidents. You need to make sure there are no objects.
6.必须升高轴承油的温度并立即停车以确认原因并。
6. The temperature of bearing oil must be raised and the machine must be stopped immediately to confirm the cause and eliminate it.
7.如果在滚动齿轮工作时发生碰撞,应立即停放,检查并碰撞。
7. If there is a collision when the rolling gear is working, it should be stopped immediately to check and eliminate the collision.

截屏,微信识别二维码