欢迎您访问莱州聚峰机械有限公司网站!
点击拨打服务热线:400-879-1999
大家都在搜: 铲斗外翻 3.5吨A后侧 3.5吨A后尾

搅拌一体机变速器油质的检测方式!

来源:http://www.zkhntjbj.com/日期:2021-03-25

概述:在设备实际操作运行过程中,搅拌一体机的变速器是一个非常重要的部件。因此,我们在使用过程中对其油质需要有一定的检测工作,那么我们具体
在设备实际操作运行过程中,搅拌一体机的变速器是一个非常重要的部件。因此,我们在使用过程中对其油质需要有一定的检测工作,那么我们具体应该怎么进行操作呢?
In the actual operation process of the equipment, the transmission of the mixer is a very important part. Therefore, we need to test the oil quality in the process of use, so how should we operate?
1、将搅拌一体机停放在水平地面上,并拉紧手制动。
1. Park the mixer on the horizontal ground and tighten the hand brake.
2、让发动机怠速运转数分钟。
2. Let the engine idle for a few minutes.
3、踩住制动踏板,将操纵手柄拨倒挡、前进挡等位置,并在每个挡位上停留几秒钟,使液力变矩器和所有换挡执行元件中都充满液压油。然后将操纵手柄拨停车挡位置。
3. Step on the brake pedal, turn the control handle to the reverse gear, forward gear and other positions, and stay in each gear for a few seconds, so that the hydraulic torque converter and all shift actuators are filled with hydraulic oil. Then turn the joystick to the park position.
               搅拌一体机变速器油质的检测方式
4、从加油管内拨出自动变速器油尺,将擦干净的油尺全部插入加油管再拔出,检查油尺上的油面高度。
4. Pull out the automatic transmission oil dipstick from the oil filling pipe, insert all the cleaned oil dipstick into the oil filling pipe, and then pull it out to check the oil level on the oil dipstick.
在对搅拌一体机变速器进行检查或故障诊断前,要对变速器油面和油质进行检查。把选挡手柄放在P位,将发动机在怠速时少运转数分钟,油液达到正常工作温度,汽车必须停放在水平路面上,这样才能确保在差速器和变速器之间的油面高度正常、稳定。
Before the inspection or fault diagnosis of the transmission of the mixer, the oil level and quality of the transmission should be inspected first. Put the gear selection handle in position P, run the engine at idle speed for at least a few minutes, the oil reaches the normal working temperature, and the car must be parked on the horizontal road, so as to ensure the normal and stable oil level between the differential and the transmission.

截屏,微信识别二维码