我们日常中见到的田螺车就是所称为搅拌车，下面为大家介绍一下该搅拌车的整体吧，下面从搅拌车液压驱动系统、电气系统与供水系统的说明开始了解起来吧。

The Tianluo truck we see in our daily life is called the mixer truck. Now let's introduce the whole of the mixer truck. Let's start with the description of the hydraulic drive system, electrical system and water supply system of the mixer truck.

液压驱动系统

Hydraulic drive system

液压系统是由包括减速机、变量柱塞泵和马达等所组成的闭式回路。

The hydraulic system is a closed circuit composed of reducer, variable piston pump and motor.

减速机加注的润滑油为重载荷车辆齿轮油，牌号GL-5(GB13895-1992)粘度等级85W/90(按GB/T14906-1994);在低温环境应使用壳牌施倍力(Spirax)ASX润滑油。

The lubricating oil filled in the reducer is heavy-duty vehicle gear oil, brand GL-5 (gb13895-1992), viscosity grade 85w/90 (according to gb/t14906-1994); In low temperature environment, shell Spirax ASX lubricant should be used.

为了满足低的启动温度(低极限温度)要求，必要时请采用预热系统，当环境温度低于-5℃时，不论采用何种润滑油等级，少预热10分钟。

In order to meet the requirements of low starting temperature (low limit temperature), please use preheating system if necessary. When the ambient temperature is lower than -5 ℃, no matter what grade of lubricating oil is used, preheat for at least 10 minutes.

系统具有温度自动保护装置。在工作温度超过65℃时温控开关自动打开，冷却器开始工作，当工作温度低于60℃时，温控开关自动关闭，冷却器则停止工作。

The system has automatic temperature protection device. When the working temperature exceeds 65 ℃, the temperature control switch automatically opens and the cooler starts to work. When the working temperature is lower than 60 ℃, the temperature control switch automatically closes and the cooler stops working.

电气系统

electrical system

搅拌车的电器系统主要是冷却风扇控制部分。

The electrical system of the mixer truck is mainly the cooling fan control part.

冷却风扇的起停由温度开关自动控制，温度高于65度时风扇启动，低于60度时风扇停止。温度开关位于冷却器上，继电器与保险片在蓄电池旁电源继电器盒内。

The start and stop of the cooling fan is automatically controlled by the temperature switch. The fan starts when the temperature is higher than 65 degrees and stops when the temperature is lower than 60 degrees. The temperature switch is located on the cooler, and the relay and fuse are in the power relay box next to the battery.

供水系统

Water supply system

自动上料搅拌机供水系统由压力水箱、水枪、水管、阀等组成。水箱的容积约为380升，采用气压供水。主要作用是在装完料后冲洗料斗及出料完毕后冲洗拌筒、卸料槽，防止混凝土粘结。在温度低于零摄氏度时，冲洗完毕后，应排尽水箱、水管内的存水，防止冻结。

The water supply system of automatic feeding mixer is composed of pressure water tank, water gun, water pipe, valve, etc. The volume of the water tank is about 380 liters, and pneumatic water supply is adopted. The main function is to wash the hopper after loading and the mixing drum and discharge chute after discharging, so as to prevent the concrete from sticking. When the temperature is lower than zero degrees Celsius, the water stored in the water tank and water pipe should be drained after washing to prevent freezing.

以上就是今天为大家介绍的关于问题以及注意事项的全部内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站http://www.zkhntjbj.com，我们的工作人员会及时与您取得联系。

The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.zkhntjbj.com , our staff will contact you in time.