What little knowledge do we need to know when we first use the all-in-one mixer? In order to help users understand the product knowledge in detail, let the manufacturer give you a brief introduction.
1. It is necessary to carefully read the manual of the all-in-one mixer and check whether the accessories are complete, such as mixer, power cord, etc.
2. When the mixing machine is used, it is not allowed to start directly at high speed. It should be gradually adjusted from low speed to high speed, so as to prevent the agitator from being out of sync and causing jumping.
3. Medium speed operation is a good way to prolong the service life of the mixing machine.
4. The all-in-one mixer shall be kept dry and clean after it is not used.
In addition, you should know how to solve the problems caused by improper use of mixing equipment, such as:
When selecting the mixing container, the shape and size of the mixing container shall be determined according to the production scale (i.e. material handling capacity), mixing operation purpose and material characteristics. When determining the volume of the mixing container, the loading coefficient shall be reasonably selected to maximize the utilization of the equipment
The temperature probe shall be correctly connected. Just unplug and re insert the temperature probe. Secondly, ensure that the temperature probe is connected before the normal operation of the mixer. It is not recommended to frequently unplug the temperature probe during use
High noise is mainly caused by long-term high-speed or overload use, which causes resonance of the motor. It can be used within the requirements of the electric mixer
The power plug is loose. Shut down the machine to check whether the power plug is damaged and whether the connection is normal
Due to improper position of the mixing shaft, move the beaker slightly to the center line of the mixing shaft with a plumb bob
The dosing support is offset. Please rotate the dosing support at a horizontal angle of 45 degrees to a reasonable position and refill
If the program setting is not correct, check again and set the mixing shaft accordingly
The above is the little knowledge shared by all-in-one mixer manufacturers. I hope the above content can be helpful to you. More information will be sorted out later for you. Please pay attention to our website www.zkhntjbj Com update.