When the concrete self loading mixer runs in winter, it needs to provide additional protection measures, because the temperature in winter is relatively low, and the long-term zero temperature is actually very unfavorable for the whole mixer. This is a condition. If the maintenance of the loading type independent mixer is not strengthened, the mixer will freeze. Therefore, it is expected that the following five points will be reached in winter.
In winter, the concrete self loading mixer "freezes" in winter, and the self provided mixer with vehicle type "freezes" in winter.
1. Braking system
Please pay attention to the quantity and quality of the brake fluid and add or replace it as necessary. Clean the entire brake system as required.
In winter, the rubber becomes hard and relatively fragile, but it not only reduces the friction system, but also relative leakage in other seasons. In winter, it is necessary to frequently clean the tire inclusions of the automatic feeding mixer of the loading vehicle, avoid using and repairing the tire for many times, and be sure to replace the tire of different models or brands.
3. Warm up
In winter, the temperature is low and the viscosity of lubricating oil is not flowing. After the engine is started, the engine is maintained at about 1100 rpm. After the mixer is preheated, the throttle starts violently, and the engine speed is not high, which increases too much. Once the noise pointer thermometer starts to rise, the first choice of temperature preheating does not have to wait for the engine temperature to rise.
As the winter goes on, the number of self-contained blenders for frosting loaders will decrease, so early winter wax is a better maintenance coating. In addition, the body is not easy to get wet, and it is not easy to freeze in winter.
Although winter driving brake emphasizes "early" and "soft", but in winter and other seasons, even if it is not driving on snow or icy road, the braking effect is not the same. If used in combination with the brake block, the mixer brake light should be faster. On ice, use the brakes to keep the engine braking, not on the road. If necessary, you can also use the handbrake, but you must stop the brake button to release, do not release the handbrake. Remember to step on the brake to prevent it from freezing.
Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: automatic feeding mixer manufacturer http://www.zkhntjbj.com 。